Hood Wraps: Cost, Benefits, Design Ideas, and Installation Guide

A hood wrap is one of the most noticeable ways to change a vehicle without wrapping the entire body. Depending on the vehicle, material, artwork, hood shape, surface condition, and installer, a professionally installed hood wrap often costs a few hundred dollars. A straightforward solid-color hood may cost less than a custom-printed design, specialty film, oversized truck hood, or hood with vents and complex contours.

Hood wraps can add contrast, display custom artwork, support commercial branding, or refresh the appearance of a vehicle with a controlled amount of coverage. They can also place a removable film layer over sound factory paint, but they are not a repair for peeling clear coat, rust, dents, chips, or failing paint. The best results begin with the right material, accurate measurements, suitable artwork, and an honest inspection of the actual hood.

Quick Answer: How Much Does a Hood Wrap Cost?

As a broad planning range, a typical professionally installed hood wrap may cost approximately $250 to $600. Small, simple hoods using a standard solid-color film can fall toward the lower end. Large truck hoods, custom-printed artwork, premium or specialty films, vents, scoops, deep contours, removal, design work, and surface preparation can move the total above that range.

Material-only pricing is different from a completed installation price. Printed graphics may be priced by the square foot or as a production package, while an installer also accounts for cleaning, disassembly, alignment, trimming, edge finishing, difficult contours, shop time, and risk. Always request a project-specific quote based on current hood photos, measurements, selected film, artwork, and installation requirements.

What Is a Hood Wrap?

A hood wrap is vinyl film applied over all or part of a vehicle hood. The wrap can be a stock solid color, specialty finish, or custom-printed graphic protected with a compatible laminate. Unlike paint, the design is applied as a film and can generally be removed or replaced when the film, paint, and removal conditions are suitable.

Common coverage options include:

• Full hood wrap: Covers the visible hood surface and finishes at or around its edges as the installation plan allows.
• Hood insert: Fills a factory-defined center section, raised area, recessed area, or stamped contour.
• Stripes: Uses one or more bands across the hood, sometimes continuing onto the roof or rear.
• Printed hood graphic: Places a custom pattern, image, logo, texture, or branded composition on the hood.
• Edge or corner accent: Wraps a deliberately shaped portion rather than the entire panel.

A hood wrap may be an independent styling change or one part of a larger partial vehicle wrap. The hood should still be designed in relation to the roof, grille, fenders, windshield, vehicle color, and any graphics on adjoining panels.

Benefits of Wrapping a Vehicle Hood

Creates a major visual change with limited coverage

The hood is a large focal point with clear panel boundaries. Changing its color or finish can alter the vehicle's character without the material and labor of a full wrap. A dark hood on a light vehicle can add contrast, while a bright custom print can make the hood the centerpiece.

Supports custom designs that paint may not easily reproduce

Printed vinyl can display gradients, branded patterns, camouflage, topographic lines, textures, illustrations, photography, and other full-color artwork. The graphic can be updated later without recreating the entire vehicle design.

Works well as a test of a larger visual direction

A hood gives an owner a contained area to evaluate a new color, finish, pattern, or brand treatment before considering additional panels. However, material appearance can vary by panel orientation; a film viewed horizontally on the hood may reflect light differently than it does on vertical doors.

Can support commercial recognition

On a parked display vehicle, service truck, event vehicle, or fleet unit, the hood can repeat a logo, pattern, color, or campaign theme. It should usually support—not replace—the side and rear information that drivers see more often on the road.

Adds a removable film layer over suitable paint

Wrap film creates a layer between the environment and sound factory paint, which may help reduce direct exposure to light abrasion, contaminants, and weather. It is not the same as paint protection film, does not make the hood damage-proof, and cannot prevent every chip, stain, scratch, or impact. Protection should be treated as a secondary benefit unless a product is specifically engineered and warranted for protective performance.

Allows future replacement

A properly selected and installed wrap can generally be replaced when the style, business information, or campaign changes. Removal outcome depends on paint integrity, film age, exposure, installation, and removal technique.

Hood Wrap Cost by Project Type

The ranges below are general planning figures for many passenger vehicles in the United States. They are not guaranteed Printara prices or installation quotes. Local labor, vehicle size, film brand, project complexity, design time, and regional market conditions vary.

• Simple solid-color hood wrap: Approximately $250 to $450 installed
• Large, contoured, or truck hood: Approximately $350 to $650 or more installed
• Custom-printed hood wrap: Approximately $350 to $700 or more installed, depending on design and production
• Specialty-film hood wrap: Often $400 to $800 or more installed, depending on film availability and difficulty
• Hood stripes or smaller insert: Approximately $150 to $400 installed, depending on alignment, number of pieces, and coverage

A lower-coverage design is not always proportionally cheaper. Two narrow stripes may use less film than a full hood, but careful measuring, straight alignment, panel-to-panel continuation, trimming, and setup still require labor. Likewise, an intricate hood insert can be more time-consuming than a clean one-piece application.

If purchasing custom-printed graphics without installation, ask what the production price includes: printed film, laminate, contour cutting, bleed, paneling, design setup, proofs, shipping, and any test prints. The installer should approve the film and production plan before printing whenever possible.

What Affects the Cost of a Hood Wrap?

Hood dimensions

A compact-car hood and a full-size truck hood do not require the same amount of vinyl. Width is especially important because it can determine whether the hood fits within one panel of the selected film or requires a planned seam or alternate orientation.

Shape and complexity

A broad, gently curved hood is different from one with vents, scoops, louvers, sharp stamped lines, deep recesses, separate inserts, exposed hardware, washer nozzles, or compound curves. Complex areas may require more time, relief planning, seams, disassembly, or multiple pieces.

Film and laminate

Premium cast wrap film, specialty finishes, reflective materials, and custom-printed film can cost more than common stock colors. Printed graphics generally require a compatible protective laminate. The correct film is chosen for the application—not simply the lowest material price.

Artwork and design time

A print-ready repeat pattern may require limited setup. A custom illustration, precise stripe layout, branded composition, photo restoration, or artwork built around vents and contours can require substantial design work. Vehicle templates help, but they do not eliminate the need for measurements and current photos.

Old graphic removal

Existing vinyl must often be removed before a new wrap is installed. Removal time changes with film age, condition, adhesive, exposure, number of layers, and whether residue remains. Very old or deteriorated film can take much longer than a newer, intact panel.

Surface preparation and condition

Ordinary cleaning is part of installation, but adhesive residue, road tar, wax, coatings, overspray, oxidation, rust, peeling clear coat, body repairs, and damaged paint require separate evaluation. Some conditions cannot be corrected by additional prep and may make the hood unsuitable for wrapping.

Disassembly and reassembly

Washer nozzles, hood ornaments, vents, scoops, emblems, trim, or other components may need to be removed or carefully worked around. Disassembly should be planned with the installer and performed by someone qualified for the component.

Installation labor and location

Shop rates, experience, facility conditions, scheduling, and regional labor costs affect installed price. Mobile installation may introduce environmental limits that a controlled indoor workspace avoids.

For a broader explanation of accent-project pricing, see how much vehicle accent graphics cost.

Hood Wrap Design Ideas

Gloss black hood

Gloss black creates strong contrast on white, silver, gray, red, blue, and other lighter paint colors. It can coordinate with a black roof, grille, wheels, mirrors, or window trim. Because gloss surfaces show reflections and surface irregularities, preparation and paint condition remain important.

Satin or matte contrast

A satin or matte hood reduces reflections and separates the hood visually from glossy paint. This can create a performance-oriented look, but the difference in care requirements and exposure should be considered before selecting the finish.

Carbon-inspired or technical texture

A printed or specialty texture can give the hood a technical appearance. Keep the scale and direction consistent, especially if the design continues onto mirrors, roof panels, or spoilers. A vinyl pattern changes appearance only; it does not turn the hood into carbon fiber or reduce its weight.

Center hood insert

Many hoods contain raised or recessed center areas that create natural graphic boundaries. Filling only that section can look intentional while leaving the outer hood in factory paint. Confirm whether the contour is suitable for the selected film and installation method.

Racing stripes

Single, twin, offset, bordered, or tapered stripes can add direction without full coverage. Alignment becomes more demanding when stripes continue over the bumper, hood, roof, trunk, tailgate, or spoiler. Document centerlines, offsets, stripe widths, and gaps before installation.

Camouflage or outdoor pattern

A hood can carry camouflage as an isolated accent or connect to lower-body and roof graphics. Pattern scale matters: small repeats may look busy across a broad hood, while oversized elements may hide the character of the pattern.

Topographic, geometric, or abstract pattern

Tone-on-tone linework, angular graphics, gradients, and abstract textures can add detail without making the hood look disconnected from the paint. Design the repeat and crop for the actual panel so recognizable elements do not land awkwardly on vents, washer nozzles, or edges.

Color fade or gradient

A printed fade can transition between the vehicle color and an accent color. The printed color may not match factory paint exactly, so use a deliberate visual transition instead of relying on an unverified edge-to-edge color match.

Motorsport-inspired graphics

Number panels, sponsor-style arrangements, technical lines, and bold angular forms can work well on show, track, or promotional vehicles. Do not use trademarks, logos, or protected artwork without permission.

Photo or illustration

A high-resolution image or commissioned illustration can turn the hood into a display surface. Review the hood from the front, windshield side, and three-quarter angles. A composition that looks correct in a flat rectangle may appear upside down, distorted, or poorly cropped from the primary viewing position.

For more ideas beyond the hood, review vehicle accent wrap ideas that make a big difference and the best parts of a vehicle to wrap for an accent.

Hood Wrap Ideas for Business Vehicles

A hood is most visible when the vehicle is parked, approached from the front, photographed from above, displayed indoors, or viewed from an elevated position. On the road, side and rear graphics usually receive more practical viewing time. Commercial hood artwork should therefore reinforce the vehicle's larger branding system.

Useful commercial approaches include:

• A simplified logo over a clean brand-color background
• A repeating brand pattern that also appears on side graphics
• A bold product image for a show, demonstration, or event vehicle
• A campaign graphic designed for a defined promotional period
• A branded stripe that continues across the vehicle
• A subtle texture that connects vehicles with different factory paint colors

Avoid placing small phone numbers, long service lists, or detailed QR codes on a hood simply because space is available. The hood is angled, reflective, and commonly viewed while either the vehicle or viewer is moving. Place road-critical contact information where it remains legible on the sides or rear, then let the hood build recognition.

Choosing the Right Hood Wrap Material

The hood is a demanding horizontal exterior surface. It receives direct sunlight, rain, snow, contaminants, bird droppings, tree sap, heat cycling, wash chemicals, and debris. The chosen film and laminate must be rated for the application, hood shape, intended duration, print process, and installation method.

Solid-color wrap film

Stock solid-color films offer consistent color and finish without printing. Options vary by manufacturer and may include gloss, satin, matte, metallic, color-shifting, and textured products. Availability, conformability, care, and expected performance differ by product.

Custom-printed vehicle wrap film

Custom printing provides full control over patterns, imagery, gradients, logos, and branded colors. Printara's standard vehicle wrap graphics are suitable for many custom hood designs when the selected construction matches the hood and installation requirements.

Metallic printed film

A metallic vinyl wrap can add a specialty base effect beneath printed artwork. Metallic character, color, ink coverage, and laminate interact, so evaluate a physical sample rather than relying only on a screen proof.

Reflective printed film

A reflective vehicle wrap returns directed light toward its source and can create a strong nighttime effect. It is not automatically appropriate for every hood contour, design, or installation. Promotional reflective graphics also do not replace required safety markings.

Discuss the hood shape with the printer and installer before choosing specialty film. A visually appealing material is not useful if its published surface, conformability, printing, lamination, or installation requirements do not support the project.

How Much Vinyl Is Needed to Wrap a Hood?

Measure the hood at its widest and longest points, following the area that the film must actually cover. Then add sufficient material for handling, curvature, alignment, edge finishing, and the installer's production method. Do not order only the exact visible top dimensions.

A basic planning formula is:

Required panel width × required panel length = planned material area

That calculation is only the beginning. Also consider:

• Available film and printer width
• Whether the hood can be covered in one piece
• Graphic orientation and pattern direction
• Installer-requested edge and handling allowance
• Contours, vents, scoops, inserts, and underside returns
• Whether a seam or separate piece is approved
• Extra material for alignment or reprinting risk

Many passenger-vehicle hoods may fit within commonly available wrap-film widths, but some trucks, commercial vehicles, and unusually shaped hoods may not. Measure the actual vehicle and confirm the roll width before finalizing artwork. For broader estimating guidance, see how much vinyl is needed to wrap a truck or trailer.

Preparing a Custom-Printed Hood Design

Start with the vehicle year, make, model, body style, trim, and current hood photos. Aftermarket hoods, vents, scoops, trim, emblems, body repairs, and model-year changes can make a generic template inaccurate.

For production-ready artwork:

• Use an accurate vehicle template as a starting point.
• Verify important dimensions directly on the hood.
• Keep logos and critical details away from vents, nozzles, sharp contours, edges, and likely relief areas.
• Extend background art beyond the intended trim line with printer- and installer-approved bleed.
• Supply logos, lettering, and geometric elements as vector artwork when possible.
• Use raster images with enough effective resolution at final print size.
• Build artwork in the correct color mode and use the printer's color workflow.
• Outline fonts or provide the required font files as permitted.
• Confirm the intended viewing direction before approving the crop.
• Request a physical color sample when matching or specialty effects matter.

Do not stretch a small web image across a hood. A file can have large pixel dimensions and still contain artifacts, soft details, or generated elements that do not reproduce cleanly. Review artwork at effective print size and provide editable source files whenever available.

How a Hood Wrap Is Installed

Exact methods vary by film, hood, artwork, and installer. The general professional workflow includes the following stages.

1. Inspect the hood

The installer checks paint condition, body repairs, clear coat, rust, chips, contamination, vents, trim, edges, and other features. Any condition that may affect adhesion or removal should be discussed before work begins.

2. Clean and prepare the surface

The vehicle is washed as appropriate, and the hood receives a final surface preparation compatible with the film manufacturer's instructions. Wax, grease, silicone, road film, adhesive, and cleaning residue can interfere with adhesion.

3. Remove or plan around components

Washer nozzles, emblems, vents, trim, or other removable pieces may be addressed according to the approved installation plan. Sensors, mechanical parts, and fragile components require qualified handling.

4. Position and align the vinyl

The panel is placed over the hood and aligned for pattern direction, stripes, logos, or other critical artwork. Installers establish reference points before committing the adhesive.

5. Apply the film

The installer works across the hood with suitable tools, controlling tension and using heat only as specified for the film and shape. Air is moved toward an exit, while the graphic is formed over manageable contours without unnecessary stretching.

6. Address contours and details

Stamped lines, vents, recesses, edges, and inserts are completed using film-appropriate techniques. Seams or separate pieces should be planned before installation rather than improvised after the panel has been overstretched.

7. Trim and finish edges

Edges are cut and finished without damaging the paint. The final termination method depends on hood construction, access, clearance, film, and installer judgment.

8. Post-heat and inspect

Areas that require post-heating are treated according to the film manufacturer's current technical guidance. The installer then checks edges, contours, alignment, trapped air, tension, and component reassembly.

Installation should take place in a clean, controlled environment within the film's specified conditions. Wind, dust, temperature extremes, moisture, and direct sun can make a large hood panel more difficult to control.

Can You Wrap a Hood Yourself?

A hood is often considered more approachable than bumpers or mirrors because it is broad and accessible. It is still a large panel that exposes alignment errors, wrinkles, contamination, overstretching, poor trimming, and edge problems. Custom prints and symmetrical stripes make mistakes especially visible.

A DIY installer needs enough workspace, lighting, cleaning supplies, wrap tools, safe cutting practices, material-specific technical guidance, and preferably a helper for larger panels. Practice with less critical material before attempting an expensive custom print. If the hood has vents, deep contours, damaged paint, specialty film, or artwork that must align precisely, professional installation is usually the safer choice.

Printara produces custom graphics but project responsibilities should be confirmed before ordering. Ask whether your printer, designer, and installer are supplying measurements, artwork setup, paneling, installation, or only the finished printed film.

Can Every Hood Be Wrapped?

No. A hood must have a suitable, stable surface and geometry for the selected film. Conditions requiring evaluation include:

• Peeling or failing clear coat
• Rust, corrosion, or bubbling paint
• Loose, chipped, oxidized, or poorly bonded paint
• Recent paint that has not met the paint manufacturer's cure requirements
• Body filler, primer, or unfinished repair areas
• Severe dents, sharp damage, or active cracking
• Wax, ceramic coating, silicone, or unknown surface treatments
• Extreme vents, louvers, channels, or unsupported edges
• Unpainted composite, textured, or low-surface-energy sections
• Excessive heat or unusual operational conditions

Vinyl follows the surface beneath it. It may make chips, dents, sanding marks, or uneven repairs more noticeable rather than hiding them. Film also cannot stabilize failing paint. If paint adhesion is questionable, removal may lift or damage the coating.

How Long Does a Hood Wrap Last?

There is no single lifespan for every hood wrap. Performance depends on the exact film and laminate, printed ink coverage, installation, climate, horizontal exposure, storage, maintenance, contaminants, vehicle use, and surface condition.

Hoods are horizontal and often receive more direct sun and environmental exposure than vertical side panels. For that reason, a manufacturer's published durability for a film may not apply equally to every orientation, color, print, or climate. Review the current product data, warranty limitations, horizontal-exposure guidance, and maintenance requirements for the complete film-and-laminate construction.

Plan removal or replacement before the film becomes severely cracked, baked, brittle, or difficult to lift. Routine inspection can identify lifting edges, impact damage, stains, and surface changes early.

How to Care for a Hood Wrap

• Follow the film and laminate manufacturer's current care instructions.
• Wash contamination promptly using compatible products and soft tools.
• Avoid harsh solvents, abrasive compounds, stiff brushes, and unapproved chemicals.
• Do not direct high-pressure spray into edges, seams, vents, or damaged areas.
• Remove bird droppings, tree sap, insects, fuel, and other aggressive contaminants as soon as practical.
• Use caution with automatic washes, especially abrasive brush systems.
• Keep the hood away from unnecessary prolonged exposure when covered storage is available.
• Have lifting edges or damage evaluated instead of pulling or cutting them yourself.

Matte, satin, textured, metallic, reflective, and printed films can have different cleaning limitations. Test any cleaner in a small inconspicuous area and do not assume a product that is safe for paint is automatically safe for every wrap.

Hood Wrap Removal and Replacement

Professional removal uses controlled technique and appropriate heat based on the film and conditions. The installer works carefully to reduce adhesive residue and unnecessary stress on the paint. Removal difficulty increases when film is old, weathered, cracked, installed over weak paint, or left beyond its useful service period.

Before replacement, the hood should be inspected again. Adhesive residue must be removed with compatible methods, and any newly discovered paint problems should be addressed. Do not install new vinyl simply to cover a failing surface revealed during removal.

A wrap cannot guarantee undamaged paint after removal. Factory paint in good condition generally presents a better foundation than unknown repaint work, peeling clear coat, uncured coatings, or prior repairs. Tell the installer about the hood's known history before installation.

Common Hood Wrap Mistakes

Choosing a film only by appearance

Finish matters, but so do conformability, adhesive, laminate, surface compatibility, print compatibility, and horizontal exposure. Confirm technical suitability before ordering.

Skipping the paint inspection

A clean-looking hood can still have repaint work, edge failure, rock chips, oxidation, coatings, or repairs that affect installation and removal.

Ordering the exact visible size

The installer needs enough material for positioning, curvature, handling, and edge finishing. Confirm the required panel size and orientation before printing.

Placing critical artwork on difficult features

Logos, faces, fine lines, and text can distort over vents, scoops, steep contours, and relief areas. Move critical details into stable sections of the hood.

Using the wrong pattern scale

A pattern that looks balanced on a small proof may repeat too frequently or become unrecognizable at full size. Evaluate a full-scale crop before approval.

Ignoring viewing direction

Artwork can be oriented for someone facing the vehicle, for the driver looking forward, or for an elevated display view. Decide which viewpoint matters before production.

Overstretching to avoid a planned seam

Trying to force one piece across geometry that the film cannot reliably handle may create distortion, thinning, lifting, or failure. Let the installer plan seams and pieces based on the product and hood.

Expecting vinyl to repair paint

A wrap is not bodywork. It does not remove dents, stop rust, bond loose clear coat, or create a smooth foundation over damaged surfaces.

Hood Wrap Project Checklist

Before ordering a hood wrap, collect and confirm:

• Vehicle year, make, model, body style, and trim
• Whether the hood is factory or aftermarket
• Current straight-on, side, and three-quarter hood photos
• Maximum hood width and length
• Locations of vents, scoops, nozzles, emblems, inserts, and trim
• Known repaint, repair, coating, rust, clear-coat, or paint issues
• Full hood, insert, stripe, or shaped coverage
• Preferred film, finish, and laminate
• Custom artwork in editable, production-quality formats
• Final pattern scale and viewing direction
• Printer-approved bleed and panel dimensions
• Installer approval of material, paneling, seams, and edge plan
• Removal and surface-preparation requirements
• A physical sample when color or specialty effect is important

Printara can produce custom hood graphics from properly prepared artwork. Coordinate with your installer before ordering so the printed panel size, film construction, orientation, bleed, and installation plan support the actual vehicle.

Frequently Asked Questions

How much does it cost to wrap a hood?

A professional hood wrap commonly falls around $250 to $600 as a broad planning range, but simple stripes may cost less and large, printed, specialty, or complex hoods may cost more. Request a quote based on the actual hood and project.

Is it cheaper to wrap or paint a hood?

A straightforward hood wrap may cost less than quality refinishing, but the services are not identical. Paint is a permanent coating and may include repair work; a wrap is a removable film applied over a suitable existing surface. Compare scope, surface condition, desired finish, and expected duration.

Can a hood wrap protect the paint?

Wrap film adds a layer over suitable paint and may reduce some direct environmental contact, but it is not impact-proof and is not automatically equivalent to paint protection film. Chips, stains, scratches, and damage can still occur.

Will a hood wrap hide rock chips or peeling clear coat?

No. Vinyl follows surface imperfections and can make their outlines visible. Peeling clear coat and loose paint may prevent reliable adhesion and can lift during removal.

Can a rusty hood be wrapped?

Active rust is not a suitable wrap foundation. Vinyl does not stop corrosion, and the surface should be properly repaired and finished before wrapping is considered.

Can you wrap an aftermarket hood?

Possibly, but the substrate, coating, finish, shape, vents, heat exposure, and manufacturer guidance must be evaluated. Bare composite, primer, texture, or unknown coatings may not accept standard wrap film reliably.

Can hood vents and scoops be wrapped?

Some can be wrapped fully or partially, while others require separate pieces, seams, disassembly, or exposed sections. Suitability depends on shape, material, heat, airflow, and the film's capabilities.

How much vinyl is needed for a hood?

Measure the hood's maximum width and length, then add the allowance requested by the installer for curvature, handling, alignment, and edges. Confirm that the selected roll or printed panel is wide enough.

Can a hood be wrapped in one piece?

Many can, but not all. Hood width, film width, contours, artwork orientation, vents, specialty-film limits, and installer technique determine whether a one-piece application is appropriate.

How long does a hood wrap take to install?

A simple hood may be completed within part of a day, but cleaning, old-film removal, disassembly, complicated contours, custom alignment, repairs, curing limitations, and shop scheduling can extend the project. Ask the installer for a specific timeline.

How long does a hood wrap last?

Lifespan varies with film, laminate, installation, horizontal exposure, climate, storage, cleaning, contamination, and vehicle use. Review the exact product's current durability and warranty information rather than relying on one universal number.

Can I pressure wash a wrapped hood?

Follow the film manufacturer's care guidance. High pressure, excessive heat, close spray distance, or directing water into edges and seams can damage a wrap. Hand washing is often the more controlled option.

Can a hood wrap be removed?

Yes, wrap film is generally designed to be removable within its intended service conditions, but removal difficulty and paint outcome depend on film age, exposure, paint condition, repaint history, installation, and removal technique.

Can I put ceramic coating over a hood wrap?

Only use products confirmed compatible with the exact film and finish. Some coatings can change appearance, cleaning behavior, or future removal. Ask the film manufacturer or installer before application.

Should a business put its phone number on the hood?

Usually, the hood is better for brand recognition than road-readable contact information. Put large, simple contact details on vehicle sides and rear areas where viewers have more time, then use the hood to reinforce the logo, color, or campaign.

Plan a Hood Wrap Around the Actual Vehicle

A hood wrap can create a major visual difference with less coverage than a full vehicle wrap. Typical installed projects often cost a few hundred dollars, while custom printing, specialty films, large hoods, difficult contours, removal, and design work can increase the price.

The best hood wraps combine suitable paint, a film chosen for the surface and exposure, accurate measurements, correctly scaled artwork, installer-approved production allowance, and a realistic care plan. Whether the goal is a gloss-black accent, custom pattern, commercial design, stripe, or specialty finish, inspect and measure the hood before production instead of treating it as a generic rectangle.

For custom-printed hood wraps and other vehicle accent graphics, explore Printara's standard vehicle wrap graphics or compare partial vehicle wrap solutions with full vehicle wrap solutions.